Pay On-line
close
Pay On-line

Shops and Support

Contact us

(044)
240-00-00or
Free in MTS network
111

Windows XP Settings

How correctly to install a modem

Connect using IR-port connection:
1. Turn on IR-port on a phone.

2. Place IR-port of the phone across IR-port of PC at a distance of no more than 10cm.

3. Wait for an icon of IR-connection in a right bottom corner of a monitor to be appeared – ñonnected.

4. Then will appear a window with a name of the phone – modem installed successfully.

5. Start configure the modem.
 
Connect using PCMCIA-card:
1. Insert the External Modem with MTS SIM-card in corresponding slot (USB, PCMCIA) of the computer.

2. Wait for a message about successful setup of “Standard PCMCIA-modem” to be appeared.

3. Start configure the modem.
 
Connecting through a cable or Bluetooth the modem should be configured manually:
1. Connect the phone and PC with help of the cable and turn on Bluetooth on the phone.

2. On PC press Start > Options > Control panel > Phone and  modem.

3. In the opened window choose the bookmark “Modems” and press the button “Add”.

4. In “Setup devices wizard” mark of the field “Do not define a type of the modem (select from list) and press the button “Next”.

5. In the window “Install modem” press “Install from disk” and choose from which disk (or folder) your modem will be installed.

6. In the next window choose the needed modem (your model of the phone) and press “Next”.

7. Specify the port number to install the modem (for example, COM 1), press “Next”.

8. After a notification of an incompatibility of a system and the modem to be appeared press “Continue any way”.

9. Wait for the message “Modem installed successfully” to be appeared, press “OK” and start configure the modem.
 

How to configure the modem

Before configure the modem make sure the phone is connected to PC.

1. On PC press Start > Options > Control panel > Phone and modem.

2. In the opened window choose the bookmark “Modems”.

3. Select your installed modem and press the button “Options”.

4. In the window “Modem options” choose the bookmark “Additional connection options”.

5. In “Additional initialization commands” enter the modem initialization line:
 

Service

Additional line of initialization
Mobile GPRS Internet AT+CGDCONT=1,"IP","internet"
Mobile GPRS Internet (for contract subscribers, who was connected before 25.07.2007)
 AT+CGDCONT=1,"IP","www.umc.ua"
Hyper.NET AT+CGDCONT=1,"IP","hyper.net"
HyperActive AT+CGDCONT=1,"IP","active"
 
ATTENTION! All symbols should be entered without spaces.
 
Press “OK” – the modem is configured, start making connection.
 

How to make a connection

 
Before making the connection be sure of the phone is connected to PC:

1. On PC press Start > Options > Control panel > Network connections.

2. Choose “Making new connection” –  “New network connection wizard” will open, press “Next”.

3. Mark “Connect to internet” and press “Next”.

4. Select “Make connection manually” and press “Next”.

5. In the opened window mark off “Use standard modem” and press “Next”.

6. Select your installed modem using a list and press “Next”.

7. In the opened window mark off fields and press “Next”:
 
    • Name of a new connection: MTS GPRS
    • Phone number:
      • If you have the phone such brand as: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: *99#
      • If you have the phone such brand as: Alcatel, Siemens, Panasonic, Samsung: *99***1#
 
ATTENTION! All symbols should be entered without spaces
 
    • login: mts
    • password: mts
    • confirm password: mt


8. Press “Next” and then the button “OK”.

9. On PC press Start > Options > Control panel > Network connections > MTSGPRS.

10. In the window “MTSGPRS connection” press the button “Options”.

11. In the bookmark “General” turn off “Use dialing rules”.

12. Select the bookmark “Network” and verify that:

    • in line "Type of connected remote access server " would be selected
      "PPP: Windows 95/98/NT4/2000, Internet"
    • in list "Components used with this connection" would be selected only:
      “Internet protocol” (TCP/IP) and “Scheduler of QoS packages”
 
13. Select “Internet protocol”  (TCP/IP) and press “Options”.
 
14. In the opened window mark off:
 
    • get IP address automatically;
    • get DNS-address automatically;
 
15. Press the button “Additional” and in a new window:
 
    • mark off  “Use main gateway for remote network”;
    • mark off  "Use compression of IP-headings";
 
16. Press “OK” – new connection created, try to use internet.
 

How to use internet

 
Connect the phone to PC.
 
On PC press Start > Options > Control panel > Network connections > MTSGPRS.
 
In “Connect to MTSGPRS” press the button “Dial”.
 
Wait for an icon “of two computers” on a taskbar to be appeared. If you wish to disconnect, click the icon “of two computers” with the right button of a mouse and select “Disconnect”.
Print version
If you searched information, but did not find it on this page, press here and leave a review.
We will consider Your suggestion on the improvement of site
close
To leave a review
That You searched?
Your suggestions
Information about You
Name *
Middle name
Family name
E-mail *
Information is needed in an order to contact with You in the case of necessity for clarification of details on Your suggestion
Enter a telephone number*
Subscriber MTS
Not subscriber MTS
By pressing button "Send", you agree with processing of your personal data and / or transferring of such data to third parties for the purposes related to filling out of the registration form as well as for marketing purposes. Details...

© ÌÒÑ. MTS. All rights reserved